What to do if my Kokido Telsa 30 does not capture debris?
- EErin JacksonJul 27, 2025
If your Kokido Swimming Pool Vacuum isn't picking up debris, several factors could be at play. First, the battery might be low; try charging it again. Second, the impeller might be jammed. Power off the vacuum and check the gap in the middle to see if any large debris is blocking it. If possible, carefully remove the debris with a small tool, but ensure the vacuum is powered off during this process. If the impeller is broken, contact your dealer for a replacement. Lastly, the filter bag might be full, so try cleaning it.