Koldwave AIRMASTER 3AK - Ceiling Panel;Duct Kit Installation

10
KOLDWAVE 3AK (AIRMASTER)
CEILING PANEL/DUCT KIT ASSEMBLY SA 040-D-0035
(OPTIONAL)
A 12" diameter, flexible duct kit assembly extends up
to 10 feet, to vent condenser air or to draw condenser
return air from the ceiling when a condenser return air
plenum is used. A 2' x 2' lay-in ceiling/panel collar
assembly is provided for venting into the false ceiling,
plus a duct collar to attach duct to the unit. Installation
of the flexible duct can be achieved in the following
manner:
1. Slip one end of the duct over the lay-in ceiling
panel/collar assembly and the other end over the
unit duct collar.
2. Clamp the duct to lay-in ceiling panel/panel collar
assembly and the unit duct collar (see page 12 for
details).
3. Place the 2' x 2' lay-in ceiling panel in the false
ceiling directly above the unit.
4. Screw the duct collar to the unit with six screws
provided.