Kolida CTS-632R10M User Manual

CONTENTS
1.FEATURES.......................................................................1
2. PREPARATION................................................................2
2.1 Precautions.................................................................................2
2.2 Appearance................................................................................3
2.3 Unpacking and Storage of the Instrument.................................5
2.4 Instrument Set Up......................................................................5
2.5 Battery Removal & Insertion  Information and Recharging......7
2.6 Assemble and Disassemble the Tribrach....................................8
2.7 Eyepiece Adjustment and Object Sighting..................................9
2.8 Power On & Off...........................................................................9
2.9 How to Enter Alphanumeric Characters...................................10
3. FUNCTION KEY AND DISPLAY.......................................12
3.1 Operating Key...........................................................................12
3.2 Function Key.............................................................................13
3.3 Star-key.....................................................................................16
4. INITIAL SETTINGS....................................................................18
4.1 Setting the Temperature and Atmospheric Pressure................18
4.2 Setting of the Atmospheric Correction.....................................19
4.3 Setting of the Prism Constant...................................................21
5. ANGLE MEASUREMENT................................................22
5.1 Measuring Horizontal Angle Right and Vertical Angles............22
5.2 Switching Horizontal Angle (Right/Left)...................................23
5.3 Setting of the Horizontal Angle................................................24
5.3.1 Setting by Holding the Angle..................................................................24
5.3.2 Setting the Horizontal Angle from the Keypad.......................................25

Kolida CTS-632R10M Specifications

General

Brand	Kolida
Model	CTS-632R10M
Category	Measuring Instruments
Language	English

Summary

PREPARATION

Precautions

Essential safety and handling guidelines for instrument use and storage.

Instrument Set Up

Step-by-step guide on mounting, leveling, and centering the instrument.

Battery Removal & Insertion – Information and Recharging

Power On & Off

FUNCTION KEY AND DISPLAY

Operating Key

Function Key

Explains the soft keys and their functions in different measurement modes.

INITIAL SETTINGS

Setting the Temperature and Atmospheric Pressure

Procedure for inputting temperature and atmospheric pressure for correction.

Setting of the Atmospheric Correction

ANGLE MEASUREMENT

Measuring Horizontal Angle Right and Vertical Angles

Detailed steps for measuring horizontal and vertical angles to targets.

Setting of the Horizontal Angle

Methods for setting the horizontal angle, including holding and manual input.

DISTANCE MEASUREMENT

Setting the Atmospheric Correction

Procedure to set atmospheric correction based on temperature and pressure.

Setting of the Prism Constant

How to set the prism constant for accurate distance measurements.

Distance Measurement (Continuous Measurement)

Instructions for performing continuous distance measurements.

Stake Out(S.O.)

COORDINATE MEASUREMENT

Procedures of Coordinate Measurement

Steps for automatically measuring 3D coordinates by inputting station data.

Setting Coordinate Values of Station Point

Procedure to set the station point's coordinates in the instrument.

Setting Height of the Instrument

Instructions for inputting the instrument height for coordinate calculations.

Setting of Target (Prism Height)

How to input the target or prism height for Z coordinate calculations.

DATA COLLECTION

Point Collect

Distance Offset Measurement

Plane Offset Measurement

Column Offset Measurement

Missing Line Measurement (MLM)

Calculates horizontal distance, elevation, and bearing between two target prisms.

Remote Elevation Measurement (REM)

Method to obtain the elevation of a point where the prism cannot be set directly.

Stake Out

Coordinate stake out

Methods for creating or inputting coordinate points for stake out.

Angle/distance stakeout

Reference Line Stakeout

Cogo

Cal.XYZ(Coordinate Calculation)

Calculates target point coordinates using azimuth, horizontal, and vertical distance.

Coordinate inverse calculation

Calculates distance and azimuth between two points.

Area/ Perimeter

Point to Line Inverse

PROGRAM

Road

Defines and stakes out curves (straight, circular, transition) for road design.

Station

Known Point

Methods for setting station and back-sight points using internal memory or direct input.

Resection

Determining a new point's location by observing up to seven known points.

Point to Line Measurement

Height Transfer

Back-sight Check

CHECK AND ADJUSTMENT

Plate Vial

Circular Vial

Compensator

Checking and adjusting the compensator's tilt angle for accurate measurements.

Inclination of Reticle

Procedure for inspecting and adjusting the reticle's inclination.

Perpendicularity of Line of Sight to Horizontal Axis (2c)

Checking and adjusting the perpendicularity between the line of sight and horizontal axis.

Adjustment of Vertical Index Difference ( I angle) and Vertical Angle 0 Datum

Adjusting vertical index difference and vertical angle zero datum.

Optical Plummet

Laser Plummet

Instrument Constant (K)

Checking and adjusting the instrument's constant for accurate distance measurements.

Parallel between Line of Sight and Emitting Photoelectric Axis

SAFETY INSTRUCTIONS

Integrated EDM (Visible Laser)

Warnings and precautions regarding the use of the integrated EDM visible laser.

Laser Plummet

Safety standards and precautions for the Class 2 laser plummet.