Kollmorgen Seidel 60WKS Series - Abbreviations Used in this Manual; Nameplate; A.4.028

I.3 Abbreviations used in this manual
The abbreviations used in this manual are explained in the table below.
Abbrev. Meaning Abbrev. Meaning
AGND analog ground PELV protected low voltage
EMC electromagnetic compatibility PLC programmable logic controller
BTB system ready to operate PSTOP limit switch for CW rotation
PSU Power supply unit
CE European Community PWM pulse-width modulation
DIN Deutsches Institut für Normung R
Ballast
ballast resistor
DGND digital ground RLG rotor position sensor
EN European standard SW setpoint
ESD electrostatic discharge V AC AC voltage
IDC analog current monitor V DC DC voltage
LED light-emitting diode VDE Verein deutscher Elektrotechniker
NSTOP limit switch for CCW rotation VTA analog speed monitor
I.4 Nameplate
The nameplate depicted below is mounted on the servo amplifier. The information shown below
is printed in the individual fields. - A.4.028.6/10
Page I - 2 General Chapter I
Series 60WKS 12.99 - A.4.028.6/10 Kollmorgen
Custom p.c.b. and
options
Serial numberServo amplifier type
Mains power supply
installed load
Nominal current Protection class