Komatsu 114E-3 Series - Specifications

114E-3 Series 3
01 Specification SEN00174-02
Specifications 1
Engine name SAA6D114E-3
Applicable model
PC300-7E0, PC300LC-7E0
PC350-7E0, PC350LC-7E0
No. of cylinders – Bore × Stroke mm 6 – 114 × 135
Total piston displacement
l {cc} 8.27 {8,270}
Firing order — 1–5–3–6–2–4
Dimensions
Overall length mm 1,625
Overall width mm 1,004
Overall height (excluding exhaust pipe) mm —
Overall height (including exhaust pipe) mm 1,601
Performance
Flywheel horsepower kW{HP}/rpm
194 {260}/1,950
(Gross)
Max. torque Nm{kgm}/rpm
1,129 {115}/1,450
(Gross)
High idle speed rpm 2,050 ± 50
Low idle speed rpm 1,000 ± 25
Min. fuel consumption ratio
g/kW·h
{g/HP·h}
226 {168}
Dry weight kg 865
Fuel injection system
—
HPCR
Fuel injection system control Electronic control type
Lubricating oil amount (refill capacity)
l
40 (35)
Coolant amount
l
10.4
Alternator — 24V, 35A, 60A (if equipped)
Starting motor — 24V, 7.5kW, 11kW (if equipped)
Battery — 12V, 120Ah/140Ah × 2
Turbocharger — HOLSET HX40W
Air compressor — —
Others — —