Operating Instructions - Section 30 2/13 OM3072
Page 30-12
Hood Seals
Acoustic panels, sheet metal, and seals (2, 3 & 4,
Figure 30-11) have been fitted to the grille structure,
firewall and grille hood.
Maintenance
Refer to the Sound Attenuation System Service sec-
tion for inspection requirements.
Do not pressure wash the sound attenuation sur-
faces. Malfunction and damage may occur,
reducing the effectiveness of the attenuators.
FIGURE 30-11. HOOD SEALS
1. Cover Plate
2. Seal
3. Seal
4. Seal
5. Insulation
6. Cover
7. Insulation
To Next Page
