OM5059 Specifications - Section 50
Component Description Page 50-1
MAJOR COMPONENT DESCRIPTION
SPECIFICATIONS
These specifications are for the standard Komatsu
830E-AC Truck equipped with the Sound Attenuation
System.
WEIGHT DISTRIBUTION
Empty Vehicle . . . . . . . . . . .Kilograms . . . (Pounds)
Front Axle . . . . . . . . . . . . . . . . . . 88 467 . . . (195,036)
Rear Axle
. . . . . . . . . . . . . . . . . . 82 315 . . . (181,473)
Total (100% Fuel) . . . . . . . . . . 170 782 . . . (376,509)
Standard Komatsu Body . . . . . . . 27 669 . . . . (61,000)
Standard tire weight. . . . . . . . . . . 21 081 . . . . (46,476)
Loaded Vehicle . . . . . . . . . .Kilograms . . . (Pounds)
Front Axle . . . . . . . . . . . . . . . . . 131 958 . . . (290,918)
Rear Axle
. . . . . . . . . . . . . . . . . . 253 890 . . . (559,732)
Total. . . . . . . . . . . . . . . . . . . . . 385 848 . . (850,650)
Nominal Payload* (237 U.S. Ton) 215 067 . . (474,141)
*Nominal payload is defined by Komatsu America Cor-
poration’s payload policy documentation. In general,
the nominal payload must be adjusted for the specific
vehicle configuration and site application. The figures
above are provided for basic product description pur-
poses. Please contact your Komatsu distributor for
specific application requirements.
OVERALL TRUCK DIMENSIONS
(Empty with Standard Body)
Length . . . . . . . . . . . . . . . . . . . . . . . . . . 14.4 m (47 ft. 3 in.)
Width . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.32 m (24 ft. 0 in.)
Height with Canopy . . . . . . . . . . . . . . . . 6.96 m (22 ft. 10 in.)
Height with Dump Body Up . . . . . . . . . . 13.52 m (44 ft. 4 in.)
Turning Circle (on front track) . . . . . . . . 28.4 m (93 ft. 0 in.)
To Next Page
