.
OPERATION
EXPLANATION OF COMPONENTS
MECHATRONICS EQUIPMENT CONTROLLER
(1)
(2)
Transmission controller
Engine controller
(3) Retarder controller
TRANSMISSION CONTROLLER
A 2-digit failure code is displayed in the inspection window of this controller (1) to show the location of the
abnormality. When the condition is normal, "0.0", "0.L", "0.-", or "0.C" is displayed.
ENGINE CONTROLLER
A 2-digit failure code is displayed in the inspection window of this controller (2) to show the location of the
abnormality. When the condition is normal, "0.0" is displayed.
RETARDER CONTROLLER
A 2-digit failure code is displayed in the inspection window of this controller (3) to show the location of the
abnormality. When the condition is normal, "0.0" is displayed.
3 - 45
To Next Page
Loading...
