EVERY 8000 HOURS MAINTENANCE
Maintenance for every 10, 100, 250, 500, 1000, 2000 and 4000 hours service should be performed at the same
time.
METHOD FOR REPLACING ENGINE HIGH-PRESSURE PIPING CLAMP
Special techniques and tools are required for this work.
Ask your Komatsu distributor for replacement of the engine high-pressure piping.
METHOD FOR REPLACING FUEL SPRAY PREVENTION CAP
Ask your Komatsu distributor for replacement of the fuel spray prevention caps.
METHOD FOR OVERHAULING STARTING MOTOR AND ALTERNATOR
Ask your Komatsu distributor to have the starting motor and alternator overhauled.
EVERY 9000 HOURS MAINTENANCE
Maintenance for every 10, 100, 250, 500, 1000 and 4500 hours service should be performed at the same time.
METHOD FOR REPLACING FUEL SPRAY PREVENTION CAP ON FUEL DOSER
PIPING
Special techniques and tools are required for this work.
Ask your Komatsu distributor for replacement of the fuel spray prevention cap on fuel doser.
END OF SERVICE LIFE
• For safe dismantling of the machine at the end of service life, please contact your Komatsu distributor.
MAINTENANCE MAINTENANCE PROCEDURE
4-83
To Next Page
Loading...
Need help?
General
