Maintenance guide Maintenance
5-2 WA70-5 – VEAM320100
5.1. Maintenance guide
Maintenance work is to be conducted by skilled personnel only.
See section "2.3. Precautions for maintenance" on page 2-20.
Perform maintenance work on hard, flat ground.
Always move the machine to the proper maintenance and repair
position.
The machine must be positioned as follows for maintenance,
unless other specifications are expressly provided.
● Lower the working attachment onto the ground.
● Move the multifunction lever to the HOLD '0' position.
● Switch the working hydraulics safety lever to position ‘1’.
● Apply service brake
● Lock the centre pivot steering when performing maintenance
work by using the centre pivot steering locking lever.
● Place chocks before and behind the wheels.
Position 1 = working hydraulics locked
Position 2 = working hydraulics released
To Next Page
Loading...
Need help?
General
