What to do for evaporator air temperature sensor failure in Komfovent C5?
If you're experiencing an evaporator air temperature sensor failure in your Komfovent Controller, check the connections of the sensor or replace it, as it might not be connected or could be broken.
What to do for water temperature sensor failure in Komfovent C5?
If you experience a water temperature sensor failure with your Komfovent Controller, check the sensor connections or replace the sensor, as it may not be connected or may be broken.
What to do for exhaust air temperature sensor failure in Komfovent Controller?
If you have an exhaust air temperature sensor failure in your Komfovent Controller, check the sensor connections, as it may be disconnected or blocked.
What to do for outdoor air temperature sensor failure in Komfovent Controller?
If the external air temperature sensor is not connected or broken in your Komfovent Controller, check the connections of the sensor or replace the sensor.
What to do for extract air temperature sensor failure in Komfovent Controller?
If you're facing an extract air temperature sensor failure in your Komfovent Controller, it could be due to the discharged air temperature sensor not being connected or being broken. Check the sensor connections or replace the sensor.
What to do for supply air temperature sensor failure in Komfovent C5 Controller?
If you are experiencing a supply air temperature sensor failure in your Komfovent Controller, it may be because the sensor is not connected or is broken. Check the connections of the sensor or replace the sensor.
What causes heat exchanger icing in my Komfovent C5 Controller?
Heat exchanger icing in your Komfovent Controller may form under a low outdoor temperature and high room humidity. Check the operation of the rotation heat exchanger drive or the air bypass damper of the plate heat exchanger.
What to do if the electric heater is off in my Komfovent C5 Controller?
If the electric heater is off in your Komfovent Controller because the heater is disconnected due to too low air volume, the protection resets automatically once the heater cools down. It is recommended to increase the ventilation intensity level.
General| Brand | Komfovent |
|---|---|
| Model | C5 |
| Category | Controller |
| Language | English |
To Next Page
