What to do if supply air temperature is higher allowable level in Komfovent KOMPAKT REGO 1600VW-EC?
If the supply air temperature is higher than the allowable level in your Komfovent Fan, check the program settings, unit heat exchanger, and heater operation.
What to do if supply air temperature dropped lower allowable level in Komfovent KOMPAKT REGO 1600VW-EC Fan?
If the supply air temperature dropped lower than the allowable level in your Komfovent Fan, check the program settings, unit heat exchanger, and heater operation.
How to reset electric heater overheating protection on Komfovent KOMPAKT REGO 1600VW-EC Fan?
If the electric heater overheating protection is on in your Komfovent Fan, you can restore protection by pressing the “RESET” button located on the heater.
What to do if plate heat exchanger temperature sensor is not connected or broken down in Komfovent KOMPAKT REGO 1600VW-EC Fan?
If the plate heat exchanger temperature sensor is not connected or broken down in your Komfovent Fan, check the sensor connections or replace the sensor.
What to do if outdoor temperature sensor is not connected or broken down in Komfovent KOMPAKT REGO 1600VW-EC Fan?
If the outdoor temperature sensor is not connected or broken down in your Komfovent Fan, check the sensor connections or replace the sensor.
What to do if exhaust air temperature sensor is not connected or broken down in Komfovent KOMPAKT REGO 1600VW-EC?
If the exhaust air temperature sensor is not connected or broken down in your Komfovent Fan, check the sensor connections or replace the sensor.
What to do if supply air temperature sensor is not connected or broken down in Komfovent Fan?
If the supply air temperature sensor is not connected or broken down in your Komfovent Fan, check the sensor connections or replace the sensor.
How to fix clogged exhaust air filter in Komfovent Fan?
If the exhaust air filter is clogged in your Komfovent Fan, you should turn the unit off and then replace the filter.
Specifies minimum clearance needed around the unit for service access.
Annual inspection of the rotary heat exchanger for free rotation and belt condition.
Instructions for connecting the unit to the main electrical power supply, including cable types.
Details on connecting external elements like sensors and actuators to the unit's connection boards.
Step-by-step guide on safely switching the air handling unit on and off.
Guide to configuring unit settings such as operation modes and air volume control.
Guide to identifying and resolving common failures and error messages indicated by the unit.
To Next Page
General