What to do if supply air temperature is higher allowable level in Komfovent Fan?
If the supply air temperature is higher than the allowable level in your Komfovent Fan, check the program settings, unit heat exchanger, and heater operation.
What to do if supply air temperature dropped lower allowable level in Komfovent KOMPAKT REGO 400HE-EC Fan?
If the supply air temperature dropped lower than the allowable level in your Komfovent Fan, check the program settings, unit heat exchanger, and heater operation.
How to reset electric heater overheating protection on Komfovent KOMPAKT REGO 400HE-EC?
If the electric heater overheating protection is on in your Komfovent Fan, you can restore protection by pressing the “RESET” button located on the heater.
What to do if plate heat exchanger temperature sensor is not connected or broken down in Komfovent Fan?
If the plate heat exchanger temperature sensor is not connected or broken down in your Komfovent Fan, check the sensor connections or replace the sensor.
What to do if outdoor temperature sensor is not connected or broken down in Komfovent Fan?
If the outdoor temperature sensor is not connected or broken down in your Komfovent Fan, check the sensor connections or replace the sensor.
What to do if exhaust air temperature sensor is not connected or broken down in Komfovent KOMPAKT REGO 400HE-EC?
If the exhaust air temperature sensor is not connected or broken down in your Komfovent Fan, check the sensor connections or replace the sensor.
What to do if supply air temperature sensor is not connected or broken down in Komfovent Fan?
If the supply air temperature sensor is not connected or broken down in your Komfovent Fan, check the sensor connections or replace the sensor.
How to fix clogged exhaust air filter in Komfovent KOMPAKT REGO 400HE-EC Fan?
If the exhaust air filter is clogged in your Komfovent Fan, you should turn the unit off and then replace the filter.
Explains the procedure for connecting different sections of the air handling unit, emphasizing alignment and sealing.
Annual inspection of the rotary heat exchanger for free rotation, belt condition, and rotor integrity.
Annual inspection and cleaning of the plate heat exchanger to ensure optimal performance.
Annual inspection of fans for cleanliness and proper operation to maintain efficiency.
Guidelines for connecting the air handling unit to the electrical power supply, including voltage types and earthing requirements.
Step-by-step instructions for switching the air handling unit on and off using the control panel.
A table detailing common error messages, their causes, and recommended steps for elimination.
To Next Page
General