What to do if supply air temperature is higher allowable level in Komfovent KOMPAKT REGO 900HE-EC Fan?
If the supply air temperature is higher than the allowable level in your Komfovent Fan, check the program settings, unit heat exchanger, and heater operation.
What to do if supply air temperature dropped lower allowable level in Komfovent Fan?
If the supply air temperature dropped lower than the allowable level in your Komfovent Fan, check the program settings, unit heat exchanger, and heater operation.
How to reset electric heater overheating protection on Komfovent KOMPAKT REGO 900HE-EC Fan?
If the electric heater overheating protection is on in your Komfovent Fan, you can restore protection by pressing the “RESET” button located on the heater.
What to do if plate heat exchanger temperature sensor is not connected or broken down in Komfovent KOMPAKT REGO 900HE-EC?
If the plate heat exchanger temperature sensor is not connected or broken down in your Komfovent Fan, check the sensor connections or replace the sensor.
What to do if outdoor temperature sensor is not connected or broken down in Komfovent Fan?
If the outdoor temperature sensor is not connected or broken down in your Komfovent Fan, check the sensor connections or replace the sensor.
What to do if exhaust air temperature sensor is not connected or broken down in Komfovent Fan?
If the exhaust air temperature sensor is not connected or broken down in your Komfovent Fan, check the sensor connections or replace the sensor.
What to do if supply air temperature sensor is not connected or broken down in Komfovent KOMPAKT REGO 900HE-EC?
If the supply air temperature sensor is not connected or broken down in your Komfovent Fan, check the sensor connections or replace the sensor.
How to fix clogged exhaust air filter in Komfovent Fan?
If the exhaust air filter is clogged in your Komfovent Fan, you should turn the unit off and then replace the filter.
Specifies required clearance for unit access and service.
Instructions for connecting modular unit sections to prevent leaks.
Annual inspection procedure for rotary heat exchanger.
Annual inspection and cleaning of the plate heat exchanger.
Procedure for checking and replacing air filters based on clogging.
Connecting unit sections and wiring according to markings.
Diagnosing and resolving common unit failures and error messages.
To Next Page
General