The Komoder Focus III Massage Chair is a sophisticated device designed to provide a comprehensive massage experience, focusing on various body parts and offering a range of customizable features. This manual outlines its functions, technical specifications, usage instructions, and maintenance guidelines.
Function Description:
The Focus III Massage Chair incorporates a 3D digital audio system with a built-in voice control microphone, allowing for hands-free operation. It features a four-wheel drive and silent design for smooth and quiet operation. The chair offers six simulation massage techniques: Knead, Tap, Knead and Tap, Shiatsu, Knock, and Massage. These techniques can be applied to various body parts, including the shoulder, back, waist, hips, and thighs.
The chair includes multiple air compression assemblies for the upper arm, arm, and calf, providing full-body pneumatic massage. It also features a shawl assembly with innovative graphene heating functions for the shoulder, back, waist, and abdomen. This heating function targets acupoints around the shoulder and clavicle, relieving symptoms such as scapulohumeral periarthritis and cough, and removing cold and moisture. When placed on the abdomen and back, it helps dispel cold, relieve pain, warm channels, remove blood stasis, and alleviate symptoms like irregular menstruation, dysmenorrhea, low back pain, and kidney discomfort.
The massage chair is equipped with a human health detection sensor that measures blood oxygen, heart rate, and fatigue index. Based on these readings, it can automatically call up corresponding massage programs to relieve mild, moderate, or severe fatigue.
Key Functions and Modes:
- Auto Massage Programs: The chair offers 15 auto massage programs, each tailored for specific needs:
- Recovery: Deeply massages shiatsu points to relieve soreness and pain.
- Relax: Conducts deep massage to gently and comfortably relax the body.
- Neck & Shoulder: Improves neck and shoulder fatigue through effective massage for cervical vertebrae and scapula.
- Waist Swing: Massages 12 acupoints to help balance the body, improve sleep, and enhance sleep quality.
- Stretch: Stretches the calf frame and backrest frame, pulling the waist and legs to relieve joint soreness and restore vitality.
- Hip Lift: Massages for buttocks and thighs to reduce excess body fat.
- Beauty Care: Massages the shoulder and neck in combination with shoulder air bag, kneads and taps the back and waist, kneads and pinches the hips and knead and taps the thighs.
- Restoration: Gentle massage for the elderly and vulnerable.
- Meridian Treatment: Deeply massages shoulder, back, and waist to relieve physical fatigue.
- Back SPA: Kneads, taps, and massages the back, waist, hips, and thighs.
- Comfort Massage: Provides a comfortable massage experience.
- Full Body Massage: Deeply massages to recall body vigor.
- Spine Care: Improves conditions caused by insufficient exercise and care for chiropractic health.
- Sedentary Pressure Release: Increases physical exercise and improves body function.
- Back and Waist Massage: Focuses on the back and waist to relieve soreness.
- Manual Massage: Allows users to select specific techniques (Knead, Tap, Knead and Tap, Shiatsu, Knock, Massage) and adjust their speed and width.
- Pneumatic Massage: Offers full-body, upper body, or lower body air compression massage with adjustable intensity (three gears).
- Heat Massage: Turns on/off the heating function.
- Sole Roller Massage: Provides sole roller massage with three adjustable intensity gears (weak, medium, strong).
- Voice Control Mode: Short press to wake up voice control; long press for three seconds to turn on/off. Commands include "Massage on," "Good-night Sleep," "Open the air pressure," and "Go little up/down."
- Timing Adjustment: Increases massage time by 5-minute increments, up to a maximum of 40 minutes.
- Angular Adjustment: Controls the seat-up/down, calf frame up/down, and zero-gravity positions (Zero I and Zero II).
- Armrest Shortcut Keys: Provides quick access to USB charging, backrest/calf frame adjustment, on/off, auto massage, pause, heat, air compression, voice control, and zero gravity functions.
Important Technical Specifications:
- Model: Focus III
- Rated Voltage: 110-120V~ 60Hz or 220-240V~ 50Hz/60Hz
- Rated Power: 160W
- Rated Time: 20min
- Safety Structure: Class I
- Material Description: PVC, PA, steel parts, electric and electron components, PU, leather, cloth, wood.
- Storage Room Temperature: -5 °C to 35 °C
- Relative Humidity (RH): 20% to 80%
Usage Features:
- Safety Warnings: Emphasizes not allowing children to touch movable parts, using a well-grounded power supply, unplugging after use or before cleaning, and operating as instructed. It warns against using the product outdoors, for purposes not listed, or if the leather is broken/damaged. Users should avoid falling asleep during massage, and ensure no children or pets are under the chair when zero-gravity function is enabled. Hard objects should be removed from pockets before use.
- Operating Environment: Recommends avoiding moist, dusty, or caustic environments, small spaces without good ventilation, direct sunlight, and heat sources. The ideal room temperature is 0 °C to 35 °C with 20% to 80% relative humidity.
- Prohibited Populations: Patients with osteoporosis, heart disease, electronic medical devices (pacemakers), fever, pregnant women, women on menstrual period, injured individuals, skin disease, unsupervised children under 14, unconscious individuals, those told by physicians to rest, or individuals with wet bodies should not use the product.
- Controller Bracket Installation: The controller bracket screws onto the support mounting seat on the armrest.
- Pillow Pad and Backrest Pad: The head cushion can be used to reduce massage intensity on the neck and shoulders. Both the head cushion and backrest are connected by zippers for easy dismounting.
- Bluetooth Speaker Play: Connects to smart devices via Bluetooth (named IMCM-XXXX) to play music.
Maintenance Features:
- Service and Maintenance: Should only be maintained by a manufacturer-designated service center. Users should not disassemble or maintain it without permission.
- Cleaning: Clean with a dry cloth; avoid using thinner, benzene, or alcohol.
- Storage: Turn off the main power switch after use. If unused for a long time, roll up the power cord and store in a dry, dust-free environment, away from high temperatures, open flames, and direct sunshine.
- Movement: Ensure all wires are pulled away from the chair. Press the backrest down to shift the center of gravity to the wheels, then push the chair to the desired position. The rear moving wheels are suitable for short-distance, slow movement only; for long-distance transport, auxiliary tools are required.
- Floor Protection: Place a carpet or cushion under the chair to prevent scratches on the floor due to prolonged heavy pressure.
- Troubleshooting: Normal motor sounds are expected. If the controller malfunctions, check power connections. The chair automatically powers off after the rated working time or if the temperature protector is activated due to prolonged use (can be used again after half an hour).
Need help?
To Next Page
General