Need help?Do you have a question about the Konecranes SMV 16-1200B and is the answer not in the manual?
General| Model | SMV 16-1200B |
|---|---|
| Load Capacity | 16, 000 kg |
| Engine Type | Diesel |
| Transmission | Automatic |
| Power Source | Diesel |
| Tire Type | Pneumatic |
| Rated Capacity | 16, 000 kg |
Lists essential safety rules for operating the machine.
Explains the different types of warning symbols and their meanings.
Provides a detailed technical overview of the machine's components and functions.
Identifies and explains the various controls and indicators within the driver's cabin.
Explains warning indicators and gauges on the instrument panel.
Describes the functions and interface of the Drive monitor IQAN MD3.
Explains the steering system, declutch function, and parking brake switch.
Details the operation and warnings associated with the emergency stop.
Covers the procedures for starting and stopping the engine safely.
Highlights safety warnings and precautions for driving the machine.
Details procedures for stopping and changing the driving direction.
Explains load handling, capacity plate reading, and alternative capacities.
Describes the operation of levers for mast and fork carriage control.
Outlines the procedure for emergency lowering of the mast.
Provides safety guidelines for driving with loads.
Details the procedures for lifting and unloading loads.
Explains safe procedures and warnings for towing the machine.
Covers methods for securing the machine during transport.
Outlines general safety and preparation steps before maintenance.
Details procedures and warnings for electrical welding and jump-starting.
Lists daily inspection and service items to perform before starting.
Provides instructions for checking the engine oil level.
Details how to check oil levels in ZF and DANA transmissions.
Explains how to inspect and fill the hydraulic oil.
Explains how to drain the hydraulic system safely.
Details the steps and safety warnings for deflating tyres.
Explains the procedure and safety warnings for inflating tyres.
Provides torque specifications for various bolt joints.
Details procedures for emptying, replacing oil, and cleaning Scania engine oil filters.
Details procedures for emptying, replacing oil, and filter for Volvo engines.
Explains procedures for adjusting the parking brake.
Covers initial checks and procedures required before machine use.
Lists daily inspection and service items to perform before operation.
Details service items to be performed within the first 150 operating hours.
Specifies quality requirements and recommendations for engine oil.
Lists recommended fuels, transmission oils, drive axle oils, and hydraulic oils.
To Next Page
