Need help?Do you have a question about the Konecranes SMV 16-600B and is the answer not in the manual?
General| Model | SMV 16-600B |
|---|---|
| Category | Forklifts |
| Engine Type | Diesel |
| Transmission | Automatic |
| Travel Speed | 25 km/h |
| Load Capacity | 16000 kg |
| Turning Radius | 4, 500 mm |
General safety guidelines and precautions for operating the machine safely and preventing accidents.
Explanation of warning symbols (DANGER, WARNING, TAKE CARE) and their meanings.
Procedures for safely starting the machine's engine, including warnings.
Procedures for safely stopping the machine's engine, including warnings.
Guidelines and precautions for driving the machine on various surfaces and conditions.
Steps for driving forwards and safely changing driving direction.
Safe practices and procedures for handling and manoeuvring loads with the machine.
Operation of mast and fork controls for lifting, tilting, and positioning.
Safety precautions and steps for lifting, transporting, and unloading loads.
General safety guidelines and preparation steps before performing maintenance.
Routine inspections for engine oil, transmission oil, hydraulic oil, fuel, coolant, and filters.
Procedures for checking, draining, filling, and replacing engine oil and filters for Volvo and Scania engines.
Maintenance of fuel filters, water separators, and bleeding the fuel system for Scania and Volvo.
Procedures for draining, filling, and replacing oil and filters for Dana and ZF transmissions.
Checks for mast/fork play, chain wear, and maintenance of the parking brake system.
Checklists for daily inspections and services to be performed within the first 150 operating hours.
A table outlining service tasks and their frequency based on time or operating hours.
Specifies required engine oil quality standards and recommended replacement intervals.
To Next Page
