Need help?Do you have a question about the Konecranes SMV 18-1200B and is the answer not in the manual?
General| Brand | Konecranes |
|---|---|
| Model | SMV 18-1200B |
| Category | Forklifts |
| Language | English |
Essential safety guidelines for machine operation, covering adherence to regulations and safe practices.
Explanation of warning symbols (Danger, Warning, Take Care) and notes.
Instructions for drivers and personnel before operating the machine.
Illustration and list of controls and indicators within the driver's cabin.
Identification of warning lights, indicators, and gauges on the instrument panel.
Explanation of the drive monitor system, its functions, and display elements.
Procedure for using the emergency brake and its consequences.
Step-by-step instructions for starting the engine, including safety precautions.
Procedure for stopping the engine, including warm-down and safety measures.
General driving instructions, safety warnings for surfaces, slopes, and visibility.
Instructions for moving the machine forwards, including gear selection and pedal use.
Procedure for changing driving direction while moving, with safety warnings.
Safety warnings and guidelines for lifting and maneuvering loads.
Explanation of how to read and understand the load capacity plate.
Instructions for operating the mast and fork carriage using control levers.
Procedure for manual lowering of the mast in case of hydraulic failure.
Safety warnings and guidelines for driving with a load, including visibility and load placement.
Step-by-step guide for lifting a load, including fork positioning and mast tilt.
Step-by-step guide for unloading a load, including fork and mast positioning.
Procedures and safety warnings for towing the machine.
Methods for securing the machine during transport, front and rear.
General guidelines and safety precautions before performing maintenance or service work.
Safety instructions and precautions for electrical welding on the machine.
Instructions and warnings for safely jump-starting the machine.
Procedure for checking and topping up the engine oil level.
Procedure for checking and topping up the oil level in the ZF transmission.
Procedure for checking and topping up the oil level in the DANA transmission.
How to inspect the hydraulic oil level using the indicator.
Procedure and safety warnings for filling hydraulic oil.
Procedure for checking and filling the radiator coolant.
Procedure for checking and filling the fuel tank.
Instructions for checking tyre condition, pressure, and approved manufacturers.
Procedure for draining brake pressure from the hydraulic system before maintenance.
Instructions and safety precautions for replacing wheels, including jacking points.
Instructions and safety warnings for deflating high-pressure tyres.
Instructions and safety warnings for inflating high-pressure tyres.
Information on the parking brake, its function, and adjustment procedure.
Procedures for initial inspection and start-up, including warranty report.
List of service items to inspect or perform for general maintenance.
List of daily inspection and service items before starting the machine.
List of service items to be performed within the first 150 operating hours.
Recommendations for diesel fuel, transmission oil, drive axle oil, hydraulic oil, grease, and coolant.
To Next Page