90 Instruction manual SMV 10 600B – 60 1500B Publ. no. 6196.082 1117, Version 02
Service and maintenance
INSPECTION OF THE EXHAUST SYSTEM FOR LEAKS
WARNING
The exhaust system may be hot.
Risk of burns.
Wait until the exhaust system has cooled down
b
efore working on it.
• Inspect the general condition of the exhaust system, replace
pipes
or silencers if they leak due to corrosion.
• Check all joints and connections.
• Check the exhaust manifolds.
• Check the rubber mounts on the silencer. Replace if necessary.
• Start the engine.
• Check if there are any leaks in the exhaust system.
FUEL TANK
• Check the tank for any leaks.
• Drain the tank of any dirt and water through the drain plug (1).
• Place a suitable container underneath.
• When clear fuel is coming out, replace the drain plug.
• Check the seal around the filling lid (2).
To Next Page
Loading...
Need help?
General
