AccurioPress C2070/C2070P/C2060/C3080/C3080P/C3070, AccurioPrint C2060L/C3070L 1-3
1.2 Cleaning the Duplex Part
1
1.2 Cleaning the Duplex Part
If the duplex part is dirty, follow the steps below to clean it.
Check the cleaning locations before turning the main body on every day.
7CAUTION
- Always check the cleaning locations before turning the main body on.
- If the power is turned on while the main body doors are closed, the fusing unit may become hot and
you may be burned when cleaning around the fusing unit.
NOTICE
When cleaning, exercise care to prevent any dirt from falling into the paper feed route.
1 Open the front door.
2 Turn ON the main power switch, and turn ON the sub power switch.
3 Lower the lever [M1] counterclockwise.
To Next Page
Loading...
