AccurioPress C2070series 8-11
8.3 Convenient Use of Scan Function (Scan to SMB)
8
7CAUTION
Stop the operation immediately when the Service Call Screen is displayed and output cannot be con-
tinued any more.
- Otherwise, an unexpected trouble may be caused. Write down the report code as stated on the 2nd
line of the message, turn off the sub power switch and main power switch in this order, then disconnect
from the power socket. Contact your service representative and inform them of the report code.
8.3 Convenient Use of Scan Function (Scan to SMB)
You can send the scan data as an E-mail attachment, send it to a shared computer (SMB server), the FTP
server, or the WebDAV server, or save it to the USB flash drive installed on this machine.
This section describes the function (Scan to SMB) to send data to the SMB server.
Scan to SMB is a function that converts the original data scanned on this machine to a computer-compatible
file and sends the converted data to a target computer or a shared folder on the server. You can store a hand-
out original as digital data using this function.
Also, you can send data to your computer and the file server used for daily file transfer in order to share it.
To carry out Scan to SMB using the Image Controller IC-603 and Mac OS X 10.7 or later, the appropriate
setting is required. For details, refer to the [HTML User's Guide].
To Next Page
Loading...
Need help?
General
