Warnings and Precautions
2
2-8 AccurioPress C2070/C2070P/C2060, AccurioPrint C2060L
2.1
2.1.7 Image Controller IC-313
2.1.8 Image Controller IC-417/Image Controller IC-313
2.1.9 Image Controller IC-314
Never lift the Image Controller IC-313 by grasping the top
panel. The top panel does not support the weight of the sys-
tem.
The Image Controller IC-313 touch panel is a liquid crystal
display (LCD) that is made of glass and can break. Do not
subject it to strong shocks. If the Image Controller IC-313
touch panel breaks and the liquid crystal material leaks out,
do not inhale, ingest, or touch it. If the material gets on your
skin or clothing, wash it off with soap and water immediately.
Do not apply excessive pressure to the panel. This changes
the color of the panel.
Do not attempt to disassemble or modify the Image Control-
ler IC-417 or Image Controller IC-313. This may result in a
fire or electrical shock.
Do not keep using the Image Controller IC-417 or Image
Controller IC-313 if the Image Controller IC-417 or Image
Controller IC-313 becomes inordinately hot, emits smoke,
unusual odor, or noise. Immediately turn off the power
switch, unplug the power cord from the power outlet, and call
your authorized service representative.
The Image Controller IC-314 is heavy, and must be lifted by
two people.
Each person must place both hands underneath the Image
Controller IC-314 from the sides.
Lift up the Image Controller IC-314 using the handle and not
using the front panel. Lifting it up using the front panel may
result in major injury.
Before opening the Image Controller IC-314 covers, ensure
that the unit has been switched off. Switching off only the
ON/OFF power button will leave some circuits energized. For
complete disconnection from the supply, the main power ca-
ble must also be disconnected from the power source.
Do not attempt to disassemble or modify the Image Control-
ler IC-314. This may result in a fire or electrical shock.
Do not keep using the Image Controller IC-314 if the Image
Controller IC-314 becomes inordinately hot, emits smoke,
unusual odor, or noise. Immediately turn off the power
switch, unplug the power cord from the power outlet, and call
your authorized service representative.
To Next Page
Loading...
Need help?
General
