EasyManuals Logo

Konica Minolta bizhub 25e User Manual

Konica Minolta bizhub 25e
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #63 background imageLoading...
Page #63 background image
3-6 Setting the e-mail environment
Machine Information
Setting Description Settings
Name Enter the name to display in the sender field
(From) when transmitting Scan to e-mail.
If e-mail is transmitted after performing a user
login, the user name registered in the user
information is displayed.
40 characters
E-mail Address Enter the e-mail address assigned to the
machine.
If e-mail is transmitted after performing a user
login, the e-mail address registered in the user
information is displayed.
50 characters
(0 - 9, A - z, @, ., -, _)
“Reply-To” e-mail
address
Enter the e-mail address used for the
destination to reply to.
50 characters
(0 - 9, A - z, @, ., -, _)
SMTP Server Setting
Setting Description Settings
SMTP Server
Address
Enter the IP address or domain name for the
SMTP server to use when transmitting e-mail.
Use the XXX.XXX.XXX.
XXX format for an IP
address. (Where XXX
is a number between
0 and 255.) 0.0.0.0,
255.255.255.255, and
127.xxx.xxx.xxx cannot
be entered.
For a domain name, you
can enter 50 characters
(0 - 9, a - z, A - Z, -, ., _).
SMTP Port
Number
Enter the SMTP port number.
0 - 65535: 25
SSL To establish SSL connection, select "SSL".
Select “SSL and “STARTTLS” for cryptographic
communication.
Select “STARTTLS” for the Microsoft Exchange
Server.
OFF
SSL
STARTTLS
SMTPS Port
Number
Enter the SMTPS port number.
0 - 65535
SSL: 465
STARTTLS: 25
SMTP Send
Authentication
Set the SMTP authentication method when
the SMTP server you are using requires
authentication.
Not used.
LOGIN
PLAIN
CRAM-MD5
SMTP
Authentication
User Name
Register the user name that should be used
when the SMTP server authenticate the
account.
50 characters
SMTP
Authentication
Password
*1
Register the password that should be used
when the SMTP server authenticate the
account.
50 characters
POP before
SMTP
Set this to “ON” to be authenticated by the POP
server when you send an e-mail.
For some providers, POP authentication is
required before you send e-mail (before a send
request to the SMTP server).
ON
OFF

Table of Contents

Other manuals for Konica Minolta bizhub 25e

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Konica Minolta bizhub 25e and is the answer not in the manual?

Konica Minolta bizhub 25e Specifications

General IconGeneral
Print Speed25 ppm
Print Resolution600 x 600 dpi
Copy Speed25 cpm
Copy Resolution600 x 600 dpi
Scan Resolution600 x 600 dpi
Paper Capacity250 sheets
ConnectivityUSB 2.0, Ethernet
FunctionsPrint, Copy, Scan
Print TechnologyLaser
Paper Input Capacity (Standard)250 sheets
Max Paper SizeA4
Paper SizeA4, A5, Legal, Letter
Operating System CompatibilityWindows, Mac, Linux

Related product manuals