E-1
INSTALLATION MANUAL
///
A1UD-9622-02
<Important>
Be sure to correctly follow the procedures in order as explained in this Installation Manual.
If you do not follow the procedure in order, the image trouble may occur.
I. Outline of installation procedures
When installing the machine and associated options as a system, follow the order shown on the upper.
Caution:
• For the detailed installation procedures for each
option, follow the instructions given in the corre-
sponding installation manual and perform the
procedures correctly. (Optional devices must be
installed after completing the main body instal-
lation.)
• When placing the machine on the floor, make
sure to use the paper feed cabinet or the desk
to secure the performance and the quality of
the product.
• To use this machine, install the reverse auto-
matic document feeder (ADF) or the original
cover.Even if you do not install the original
cover, be sure to install the hinge covers sup-
plied with the original cover.
• Once the Power Switch is turned ON, do not
turn OFF it until the installation work has been
completed.
• Lifting the machine in an awkward position or
transporting it in a poorly balanced position
could result in personal injury. When transport-
ing the machine, assign an adequate number of
persons to the job and ensure that each person
can take a good position of not being exces-
sively loaded. Machine mass:
• Approx. 78 kg (171-15/16 lb)
(423/ADF-standard 363 machines)
• Approx. 66 kg (145-1/2 lb)
(363 machines without ADF/283/223)
DF-621
*2
DK-508
Electronic system options
OC-509SP-501
AU-201
Machine
EK-604
*1
FS-529
SD-509
JS-603
KH-101
JS-505
*1
: No particular order in installation
procedures.
*2
: Whether the device is standard or
optional depends on each model
and marketing area.
FS-527
PK-517
AU-102
EK-605
*1
UK-203
*1
HD-516
*2
MK-726
WT-506
FK-508
PC-109 PC-208 PC-409
✱ Electronic system options
SC-507
*1
A1UDIXC001DA
II. Installation space (unit: mm (inch))
bizhub 423 + PC-208 + FS-527 + SD-509
III. Pre-installation check items
1. Select a level and stable place for installing the
machine.
2. Be sure to use a power source of the voltage and
frequency indicated in the product specifications.
Ensure that the current carrying capacity of the
power outlet is at least equal to the current listed
in the product specifications.
3. Power the machine directly from a dedicated
power outlet. (Do not use an extension cord.)
4. Do not plug or unplug the power cord with wet or
dirty hands, otherwise you may get an electric
shock.
5. Avoid a hot and humid environment, or a place
exposed to direct sunlight.
6. Avoid a dusty location, or a place near volatile
and flammable substances.
7. Avoid a poorly ventilated place.
IV. Accessory parts
*1
Varies depending on the applicable marketing
area.
*2
Supplied only when the ADF is standard.
Note:
This manual provides the illustrations of the acces-
sory parts and machine that may be slightly differ-
ent in shape from yours. In that case, instead of
the illustrations, use the appearance of your
machine to follow the installation procedure. This
does not cause any significant change or problem
with the procedure.
A1UDIXC002DA
976
(38-7/16)
1634
(64-5/16)
658
(25-7/8)
1187
(46-3/4)
293
(11-9/16)
834
(32-13/16)
1553
(61-1/4)
412
(16-1/4)
816
(32-1/8)
325
(12-13/16)
No. Name Q’ty
1. User’s guide holder 1
2. Quick guide
(Copy/Fax/Scan/Box operations)
1
3. Installation manual 1 set
4. User’s guide CD 1
5. CD-ROM 1 set
6. Paper size label 1
7.
Label (Legal restrictions on copying)
*1
1
8.
Chart
*2
1
9. Seal A (Round) 2
10. Seal B (Square) 2
11. Cap A (Black) 2
12. Cap B (White) 2
13.
Power cord
*1
1
14.
Power cord instruction
*1
1
15. Control panel 1
16.
Screw (3
× 8 mm)
1
17.
Spacer
*1
1
18. Panel pen 1
19. Developer 1
20. Mylar 2
After unpacking, be sure to get rid of the
packaging materials and keep them out of
the reach of children.
Putting the head in the plastic bag
involves danger of suffocation.
Applied Machines: / / /
To Next Page
Need help?
General
