Konica Minolta bizhub 36 User Manual (English)

Other manuals for Konica Minolta bizhub 36

Information Sheet11 pages

Setup Instructions23 pages

Questions and Answers:

K
Kathleen SharpAug 23, 2025
What to do if print processing finished but my Konica Minolta bizhub 36 All in One Printer doesn't start?
- M
  michelestewartAug 23, 2025
  If print processing has finished on your computer but printing does not start on your Konica Minolta All in One Printer, the issue could stem from several causes. The printer driver may not be supported, so check the specified printer name. The network or USB cable might be disconnected, ensure it's correctly connected. An error may have occurred on the machine, check the control panel. Unprocessed jobs may be waiting to be processed, check the job processing order using [Job] on the control panel. If [Store Job] or [Secure Print] was specified, check the control panel to see if the job is held in a hard disk. If account track is enabled, ensure you've entered the correct account track name and password.
J
jeannegrantAug 25, 2025
Why I cannot print from external memory on Konica Minolta All in One Printer?
- K
  Kevin HawkinsAug 25, 2025
  If you cannot print from the external memory on your Konica Minolta All in One Printer, it could be due to several reasons. First, the file format might not be printable; ensure it is JPEG, TIFF, XPS, or PDF. Second, [External Memory Print] may be disabled; select [Enable] in [Administrator Settings] - [External Memory Print.] Third, public user authentication may be unavailable; contact the administrator. Fourth, encrypted USB flash memory may be in use; note that encrypted USB flash memory cannot be used.
K
Kenneth FosterAug 27, 2025
Why printing in user authentication is not available on Konica Minolta bizhub 36 All in One Printer?
- S
  Shannon KellerAug 27, 2025
  If printing in user authentication or account track mode is unavailable on your Konica Minolta All in One Printer, the user name, account name, or password may be incorrect; ensure you enter the correct credentials. Also, user authentication or account track may be disabled on the printer driver; enable it in the printer driver settings. Finally, the entered user name or account name may not be authorized; check with the administrator to confirm authorization for printing.
C
Cassandra SmithAug 27, 2025
Why are there dark spots on my Konica Minolta All in One Printer copies?
- K
  kathryn25Aug 27, 2025
  If dark specks, spots, or streaks appear on your Konica Minolta All in One Printer's output, several factors could be at play. Ensure the Original Glass and Slit Scan Glass are clean; wipe them with a soft, dry cloth. Also, clean the Original Pad using a soft cloth dampened with mild detergent. If you're copying from highly translucent material, place a blank sheet on top of the original. If copying a thin, 2-sided original, the print on the back might show through; try selecting a lighter background density in the Background Removal screen.
L
Logan JacobsAug 29, 2025
How to fix angled image on Konica Minolta All in One Printer?
- S
  Sean MooreAug 29, 2025
  If copies from your Konica Minolta All in One Printer are printed at an angle, check the original's position against the Original Scale or within the ADF, ensuring the adjustable Lateral Guide fits the original's size. If using the ADF and the original isn't feeding correctly, try placing it on the Original Glass. Also, ensure the Slit Scan Glass is clean. Make sure the adjustable Lateral Guide is snug against the paper's edges, and flatten any curled paper before loading it.
B
bpetersAug 30, 2025
What to do if copying does not start on Konica Minolta All in One Printer?
- S
  Steven HamptonAug 30, 2025
  If your Konica Minolta All in One Printer isn't copying, first, make sure the Top Right Door is securely closed. Then, verify that you're using paper that matches the original's size; if not, load the appropriate paper into the paper tray.
T
twarrenAug 31, 2025
Why is the image dark on my Konica Minolta All in One Printer?
- A
  Austin StevensonAug 31, 2025
  If your Konica Minolta All in One Printer's image is dark, the copy density may be set too high. Press [-] in the Density screen to lower it. If the original wasn't pressed closely against the Original Glass, reposition it to ensure closer contact.
A
Angelica CarrollSep 2, 2025
Why is the image light on my Konica Minolta All in One Printer copies?
- M
  Michael EvansSep 2, 2025
  If the image from your Konica Minolta All in One Printer is light, the copy density might be set too low. Press [+] in the Density screen to increase it. Also, check if the paper is damp; if so, replace it with new paper.
G
Gary GreenSep 3, 2025
Why is the image blurry on my Konica Minolta All in One Printer?
- C
  Cassidy WoodsSep 3, 2025
  If the images from your Konica Minolta All in One Printer are partially obscured or blurry, the paper may be damp; replace it with new paper. Also, make sure the original is pressed closely against the Original Glass when copying.
J
Jason BowmanSep 5, 2025
Why is paper curling from my Konica Minolta All in One Printer?
- K
  kevin99Sep 5, 2025
  If your Konica Minolta All in One Printer's printed page is curled, it might be due to the paper type, especially with recycled paper. Try removing the paper from the tray, turning it over, and reloading it. Alternatively, replace the paper with new, dry paper.

Konica Minolta bizhub 36 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Speed (Black)	36 ppm
Print Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Original Size	Up to A3
Duplex Printing	Yes
Copy Speed	36 cpm
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Maximum Paper Size	A3
Connectivity	USB 2.0, Ethernet
Scanner Type	Flatbed and ADF
Scan Speed (Color)	30 ipm
Scan Speed	36 ipm
Monthly Duty Cycle	150000 pages