Konica Minolta bizhub 36 User Manual (English)

Other manuals for Konica Minolta bizhub 36

Information Sheet11 pages

Setup Instructions23 pages

Questions and Answers:

T
Tammy MarshallSep 6, 2025
Why is the edge of the image dirty on my Konica Minolta All in One Printer?
- D
  Debbie BrownSep 6, 2025
  If the edge of the printed image from your Konica Minolta All in One Printer is dirty, start by cleaning the Original Pad with a soft cloth dampened with mild detergent. Also, check if the selected paper size is larger than the original when the Zoom setting is at "Full Size" (100.0%). If so, either select a paper size that matches the original or choose 'Auto' to enlarge the copy. Finally, if the size or orientation of the original differs from that of the paper at "Full Size", adjust the paper size or orientation accordingly; or if the copy was reduced, select a zoom ratio that fits the original to the paper or select Auto.
U
usullivanSep 8, 2025
What to do if Konica Minolta All in One Printer does not turn on?
- Y
  yvonnecooperSep 8, 2025
  If your Konica Minolta All in One Printer doesn't start when you turn on the Power Switch, check that the power supply plug is correctly inserted into the electrical outlet.
M
Megan SmithSep 9, 2025
What to do if Konica Minolta All in One Printer won't copy after paper jam?
- J
  James RiceSep 9, 2025
  If your Konica Minolta All in One Printer still won't produce copies after clearing a paper jam, check for jammed paper in other locations and remove it.
J
jacobbellSep 12, 2025
Why aren't the pages loading uniformly on my Konica Minolta All in One Printer?
- K
  Katherine ToddSep 12, 2025
  If the pages fed out from your Konica Minolta All in One Printer are not uniformly loaded and the staples are incorrectly positioned, it could be due to curled paper. Remove the paper from the tray, turn it over, and reload it. Also, check for gaps between the Lateral Guide in the paper tray and the sides of the paper; slide the guide against the paper to eliminate any gaps. Finally, ensure the paper type is correctly configured for the selected tray.
S
Scott SilvaSep 12, 2025
Why is my Konica Minolta All in One Printer not feeding the original?
- C
  Christopher ParkerSep 12, 2025
  If the original is not feeding into your Konica Minolta All in One Printer, ensure the ADF is securely closed. Verify that the original meets the device's specifications. Also, make sure the original is loaded correctly.
J
Jason BerrySep 13, 2025
Why is the Finisher FS-529 not working on my Konica Minolta All in One Printer?
- K
  Kenneth BrownSep 13, 2025
  If the Finisher FS-529 on your Konica Minolta All in One Printer isn't operating, verify that the cord is correctly inserted into the connector to ensure power is being supplied.

Konica Minolta bizhub 36 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Speed (Black)	36 ppm
Print Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Original Size	Up to A3
Duplex Printing	Yes
Copy Speed	36 cpm
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Maximum Paper Size	A3
Connectivity	USB 2.0, Ethernet
Scanner Type	Flatbed and ADF
Scan Speed (Color)	30 ipm
Scan Speed	36 ipm
Monthly Duty Cycle	150000 pages