Why does my Konica Minolta bizhub 4050 feed multiple sheets?
If your Konica Minolta All in One Printer feeds multiple sheets as a stack, it might be due to sheet edges not being aligned. Remove the sheets, align their edges, and then load them into the tray again. Another cause could be damp paper. In that case, remove the damp paper and replace it with new, dry paper.
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Standard Paper Capacity | 650 sheets |
| Duplex Printing | Yes |
| Functions | Print, Copy, Scan, Fax |
| Print Technology | Laser |
| Scan Resolution | 600 x 600 dpi |
| Copy Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 kbps |
| Fax Resolution | 200 x 200 dpi |
| Processor | 800 MHz |
| Memory | 2 GB |
| Mobile Printing | Yes |
| Paper Capacity | 650 sheets |
| Max Paper Size | A4 |
| Monthly Duty Cycle | 100, 000 pages |
| Connectivity | Ethernet, USB |
| Control Panel | 7-inch touchscreen |
| Paper Sizes Supported | A4 |
| Scanner Type | Flatbed with ADF |
| Type | Multifunction |
| Print Speed | Up to 42 ppm |
| Maximum Paper Capacity | 2300 sheets |
| Copier Speed | Up to 42 cpm |
| Copy Speed | Up to 42 cpm |
To Next Page