Konica Minolta bizhub 423 User Manual

Finishing documents
4
4-10 bizhub 423/363/283/223
4.5
Useful printing operations Chapter 4
4.5 Finishing documents
Stapling and hole punching
Printed documents can be bound with staples or have holes punched in them.
Windows PCL/PS/XPS drivers: Finish tab
Macintosh OS X driver: Layout/Finish
Reference
- The Staple settings are available only if the optional finisher has been installed.
- The Punch settings are available only if the optional punch kit and finisher FS-527 have been installed.
- By selecting an output tray, the output destination can be specified.
- Select the desired Paper Arrangement setting to specify whether priority is given to the finished product
or to productivity as the method for adjusting the binding position.
d Reference
For details, refer to chapter 9 and chapter 10 of the [User’s Guide Print Operations].
Center stapling and folding
Select whether the finished document is folded in half, or whether it is folded in half and stapled.
Windows PCL/PS/XPS drivers: Finish tab
Macintosh OS X driver: Layout/Finish
Reference
- The Center Staple and Fold, and Fold settings are available only if the optional finisher FS-527 and
saddle stitcher have been installed.
d Reference
For details, refer to chapter 9 and chapter 10 of the [User’s Guide Print Operations].
Punch Staple
Half-Fold Center Staple
and Fold

Konica Minolta bizhub 423 Specifications

General

Print Speed	42 ppm
Monthly Duty Cycle	150, 000 pages
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Memory	2 GB
Hard Disk Drive	250 GB
Scan Resolution	600 x 600 dpi
Fax Compatibility	Super G3
Maximum Paper Size	A3
Operating System Compatibility	Windows, Mac, Linux
Paper Capacity	1, 150 sheets
Connectivity	USB 2.0
Original Size	A3
PDL	PCL, PostScript
Fax Transmission Speed	Up to 33.6 kbps
Print Resolution	1200 x 1200 dpi
Scan Speed	70 opm (originals per minute)