What to do if Konica Minolta bizhub 4700P displays 'Serial option [x] error [54]'?
If your Konica Minolta printer displays a serial option error, make sure that the serial cable is properly connected and is the correct one for the serial port.
What to do if my Konica Minolta bizhub 4700P says 'Cartridge low [88.xy]'?
If your Konica Minolta printer indicates that the cartridge is low, you may need to order a new toner cartridge. If you want to continue printing temporarily, select Continue on the printer control panel to clear the message.
How to fix Konica Minolta Printer 'Reinstall missing or unresponsive cartridge [31.xy]' error?
To resolve the 'Reinstall missing or unresponsive cartridge' error on your Konica Minolta printer: * First, check if the toner cartridge is missing and install it if it is. * If the cartridge is already installed, remove it and then reinstall it to ensure it is properly connected.
What to do if Konica Minolta bizhub 4700P shows 'Load [paper source] with [custom string] [paper orientation]'?
If your Konica Minolta printer prompts you to load a specific paper, load the tray or feeder with the correct size and type of paper indicated in the message.
What to do if Konica Minolta Printer displays 'Cartridge nearly low [88.xy]'?
If your Konica Minolta printer warns that the cartridge is nearly low, you can select Continue on the printer control panel to clear the message and proceed with printing, if necessary.
How to resolve Konica Minolta Printer 'Insufficient memory for Flash Memory Defragment operation [37]' error?
To resolve the 'Insufficient memory for Flash Memory Defragment operation' error on your Konica Minolta printer, delete fonts, macros, and other data from the printer memory.
What to do if Konica Minolta Printer displays 'Too many trays attached [58]'?
If your Konica Minolta printer displays a message indicating too many trays are attached, remove the extra trays.
What to do if Konica Minolta bizhub 4700P displays 'Defective flash detected [51]'?
If your Konica Minolta printer detects a defective flash, replace the defective flash memory card.
What to do if Konica Minolta Printer displays 'Replace cartridge, 0 estimated pages remain [88.xy]'?
If your Konica Minolta printer displays a message indicating that you need to replace the cartridge with 0 estimated pages remaining, replace the toner cartridge to clear the message and continue printing.
Why does my Konica Minolta bizhub 4700P say 'Cartridge very low, [x] estimated pages remain [88.xy]'?
If your Konica Minolta printer is displaying a 'Cartridge very low' message with an estimate of remaining pages, it means you may need to replace the toner cartridge very soon.
General| Print Technology | Laser |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | Up to 150, 000 pages |
| Maximum Paper Input Capacity | 2, 300 sheets |
| Standard Memory | 512 MB |
| Processor | 800 MHz |
| Duplex Printing | Yes |
| Connectivity | USB, Ethernet |
| PDL | PCL 6, PostScript 3 |
| Supported Operating Systems | Windows, Mac, Linux |
| Hard Drive | Optional |
To Next Page
