bizhub C554/C454/C364/C284/C224 3-9
3.1 Print Function
3
Basic Settings and Operations Chapter 3
3.1.2 Required settings and basic operations (For Mac OS)
Print data created on your computer via the network.
This section describes how to configure a printer driver, for the OS X 10.6 environment, Bonjour connection,
and use of metric-size paper as major conditions.
Preparation flow
The following describes a preparation flow to print data. For details, refer to the relevant page.
This preparation is not required the second time or subsequent times.
1 Checking the cable connection (Administrator)
% Check that this machine is correctly connected to the network cable. For details, refer to page 3-10.
2 Checking network settings of this machine (Administrator)
% Check the network settings of this machine. For details, refer to page 3-10.
The network can be used with the default settings unless otherwise requested.
3 Installing the printer driver
% Install the printer driver on the computer. For details, refer to page 3-12.
4 Adding and configuring a printer driver
% Set up your computer so that data can be printed using the installed printer driver. For details, refer
to page 3-15.
Operation flow
The following describes a flow to print data from your computer. For details, refer to page 3-17.
1 Opening original data
% Open the data you want to print using the application software.
2 Configuring the printer driver for printing
% Select a printer driver, and change the setting if necessary before printing.
To Next Page
Loading...
Need help?
General
