E-1
INSTALLATION MANUAL
9J06-9621-01
<Important>
Be sure to correctly follow the procedures in order as explained in this Installation Manual.
If you do not follow the procedure in order, the image trouble may occur.
I. Outline of Installation Procedures
When installing the machine and associated options as a system, follow the order shown on the upper.
Note:
• For the detailed installation procedures for each option, follow the instructions given in the corresponding
Installation Manual and perform the procedures correctly.
• When placing the machine on the floor, make sure to use the Paper Feed Cabinet or the Desk to secure
the performance and the quality of the product.
• Once the Power Switch is turned ON, do not turn OFF it until the installation work has been completed.
• Lifting the machine in an awkward position or transporting it in a poorly balanced position could result in
personal injury. When transporting the machine, assign an adequate number of persons to the job and
ensure that each person can take a good position of not being excessively loaded.
(mass: approx. 103 kg (227 lb))
FK-502
SA-501
EK-702
MK-706
DF-608
MT-501
WT-501
SD-503
✱ Electron System Options
PC-103
PC-203 DK-502
Machine
PC-403
Dehumidifier Heater 1C
Electron System Options
OT-601
OC-501SP-501
FS-514 PK-510
ML-501
VK-501
FK-502
IC-406
VI-503
EM-309
SC-503
9J06IXC001DA
Applied Machine: