bizhub 754e/654e 2-105
2.21 AppleTalk Setting Function
2
2.21 AppleTalk Setting Function
When access to the machine by the administrator of the machine through the Administrator Settings is au-
thenticated, the machine enables making of the AppleTalk Settings.
Making the AppleTalk Setting
<From the Control Panel>
0 For the procedure to call the Network Settings screen on the display, see steps 1 and 2 of page 2-93.
0 Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
1 Call the Network Settings screen on the display from the control panel.
2 Touch [AppleTalk Settings].
3 Make the necessary settings.
4 Touch [OK].
% If a message appears that prompts you to turn OFF and ON the main power switch, turn OFF and
ON the main power switch. When the main power switch is turned off, then on again, wait at least
10 seconds to turn it on after turning it off. If there is no wait period between turning the main power
switch off, then on again, the machine may not function properly.
<From PageScope Web Connection>
0 For the procedure to access the Admin Mode, see page 2-2.
0 Do not leave the machine with the Admin Mode setting screen left shown on the display. If it is abso-
lutely necessary to leave the machine, be sure first to log off from the Admin Mode.
1 Start PageScope Web Connection and access the Admin Mode.
2 Click the [Network] tab.
3 Click [AppleTalk Setting] from the menu.
4 Make the necessary settings.
5 Click [OK].
To Next Page
Loading...
Need help?
General
