Name: Konica Minolta bizhub C458
Brand: Konica Minolta
Rating: 5 (1 reviews)

To Next Page

To Previous Page

bizhub C658/C558/C458/C368/C308/C258 3-49

3.3 Fax function

Basic Settings and Operations Chapter 3

Preparation flow

The following describes a preparation flow to send a fax from a computer. For details, refer to the relevant

page.

This preparation is not required the second time or subsequent times.

1 Checking the cable connection (Administrator)

% Check that this machine is correctly connected to the telephone line and network cable. For details,

refer to page 3-49.

2 Checking network settings of this machine (Administrator)

% Check the network settings of this machine. For details, refer to page 3-50.

You can use this function with the default settings unless otherwise requested.

3 Installing the fax driver on your computer

% Installing the fax driver on your computer For details, refer to page 3-50.

Operation flow

The following describes a flow to send a fax. For details, refer to page 3-52.

1 Creating data

% Create data to be sent using application software.

2 Configuring the fax driver

% Select a fax driver, and change the setting if necessary.

3 Entering a destination to send data

% Enter a destination to send data.

Checking the cable connection

1 Check that a modular cable is connected to the LINE port of this machine.

2 Check that a LAN cable is connected to the LAN port of this machine and the green LED is on.

Other manuals for Konica Minolta bizhub C458

Questions and Answers:

Need help?

Do you have a question about the Konica Minolta bizhub C458 and is the answer not in the manual?

General