Konica Minolta BIZHUB PRO C6500 Troubleshooting Guide

22 SC28-01 to 04 when machine is powered up
[Symptom]
SC28-01, 02, 03 or 04 occurs when machine is powered up after option HDD installation or
replacement.
[Probable cause]
The connectors of option HDD are not properly connected.
CAUTION:
Originally, SC28-01 to 04 occurs if a patch for adjustment is not created during Dmax
correction in the automatic gamma adjustment. For example, it can occur by depletion of
toner on the developing sleeve (Refer to
30. Depletion of developer after continuous print)
patch creation position).
[Solution]
Firmly connect the connectors.
Table of contents
29

Konica Minolta BIZHUB PRO C6500 Specifications

General

Monthly Duty Cycle	300, 000 pages
Duplex Printing	Yes
Scanner Type	Color Scanner
Scanner Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Print Speed	65 ppm (color and B&W)
Resolution	1200 x 1200 dpi
Connectivity	Ethernet, USB
Operating System Compatibility	Mac
Color Capability	Full color
Copy Speed	65 ppm (color and B&W)