Before making copies
5
bizhub PRO C6500 / bizhub PRO C6500e 5-19
5.3.2 Positioning the original on original glass
Use the original glass when the original is not suitable for use with the ADF,
e.g., when size is incompatible, or when the original is folded, stapled, torn,
or in generally poor condition.
!
Detail
For details of the original unavailable in the ADF, see page 3-14.
0 Copy result may not be satisfactory if the original should not be
positioned correctly, especially when using duplex mode, Staple, Half
Fold, or Booklet Pagination. See page 6-3 for details.
0 When Book Copy, Auto mode in Repeat, or Image Centering is selected,
the ADF should be kept open while scanning the original. For details on
each function, see "8 Application functions".
1 Raise the ADF.
2 Position the original FACE DOWN in the left rear corner, aligning the
edge with the left measuring guide.
– The direction of the original should conform to the Original direction
icon displayed on the Copy screen.
3 Gently close the ADF to prevent the original from shifting on the glass.
To Next Page
Loading...
Need help?
General
