Konica Minolta BIZHUB PRO C6500 User Manual

Basic job settings
6
bizhub PRO C6500 / bizhub PRO C6500e 6-61
6.6.4 Adjusting fixing pressure of fixing unit
If printed image on large-sized paper becomes rugged, lowering the fixing
pressure of the fixing unit may normalize the image. Reversely, if the image
duplex-printed on small-sized thick paper shows unevenness, adding fixing
pressure of the fixing unit may reduce the unevenness.
Follow the procedure below to adjust the fixing pressure of the fixing unit.
1 Open the front door of the main body.
2 Turn the fixing conveyance unit lever
leftward to withdraw the conveyance
fixing unit.
3 Holding the handle on the left side of
the fixing unit, push it up to open the
left side cover of the fixing unit.
4 Move the fixing pressure adjustment
knob.
– Slide the knob rightward to align
the arrow mark on the lever with
the one on the right side, if
printed image on large-sized
paper becomes rugged.

Konica Minolta BIZHUB PRO C6500 Specifications

General

Monthly Duty Cycle	300, 000 pages
Duplex Printing	Yes
Scanner Type	Color Scanner
Scanner Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Print Speed	65 ppm (color and B&W)
Resolution	1200 x 1200 dpi
Connectivity	Ethernet, USB
Operating System Compatibility	Mac
Color Capability	Full color
Copy Speed	65 ppm (color and B&W)