To Next PageTo Next Page
Need help?Do you have a question about the Konica Minolta ineo 367 and is the answer not in the manual?
Manual scope, ISO15408 compliance, and initial machine setup requirements like unpacking and component installation.
Engineer qualifications, data protection, CE password security, and maintenance control.
Procedure to access Service Mode, check firmware versions, and manage access lock states.
Procedure to release the access lock state and clear the illegal access count in Service Mode.
Details of security settings, enabling Enhanced Security, and functions affected by its activation.
Lists functions disabled or changed when Enhanced Security Mode is enabled.
Managing CE/Administrator passwords, CE Authentication, and initializing system settings.
Managing HDD, setting operation ban release time, unlocking administrator, and firmware rewriting procedures.
How to overwrite all data and reset passwords, and a list of items that are cleared.
Updating firmware via USB, preparing the device, and steps for handling transfer failures.
Procedure to enter machine type information, necessary when the MFP board is replaced.
Installing the FAX kit, configuring settings like country code, and managing operational parameters.
Manual scope, ISO15408 compliance, and initial machine setup requirements like unpacking and component installation.
Engineer qualifications, data protection, CE password security, and maintenance control.
Procedure to access Service Mode, check firmware versions, and manage access lock states.
Procedure to release the access lock state and clear the illegal access count in Service Mode.
Details of security settings, enabling Enhanced Security, and functions affected by its activation.
Lists functions disabled or changed when Enhanced Security Mode is enabled.
Managing CE/Administrator passwords, CE Authentication, and initializing system settings.
Managing HDD, setting operation ban release time, unlocking administrator, and firmware rewriting procedures.
How to overwrite all data and reset passwords, and a list of items that are cleared.
Updating firmware via USB, preparing the device, and steps for handling transfer failures.
Procedure to enter machine type information, necessary when the MFP board is replaced.
Installing the FAX kit, configuring settings like country code, and managing operational parameters.
General| Type | Laser |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Print Speed (Black & White) | 36 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Copy Speed | 36 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Fax Transmission Speed | Up to 33.6 Kbps |
| Max Paper Size | A3 |
| Original Format | A3 |
| Paper Input Capacity | 1, 150 sheets |
| Paper Output Capacity | 250 sheets |
| Duplex Printing | Yes |
| Scan Speed | Up to 45 opm |
| Interface | USB 2.0 |
| Connectivity | USB, Ethernet |
| Network Connectivity | Ethernet |
| Operating System Compatibility | Windows, Mac, Linux |
