EasyManuals Logo

Konig & Meyer Guardian 5 User Manual

Konig & Meyer Guardian 5
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
PLACING INSTRUMENTS
USER INSTRUCTIONS
CONTROL, MAINTENANCE, CLEANING
- For maintenance work, pay attention to possible hazards (squeezing, hurting).
- For cleaning it is recommended to use a slightly damp cloth and non-abrasive
- cleaner.
FAULT FINDING (F) and REPAIR (R)
F: stand wobbles B: check floor
B: push stand down, frames make a small adjustment possible.
F: rack "moves" B: Check whether the rack is correctly in position
B: (click sound, see 2).
F: inclining guitar B: Straighten the guitar, select the correct holder and recess
B: (see 10)
10 NOTE: each body holder is
10 aligned with a neck holder.
11 Do not position the guitars at a slant!
12 The guitars may be positioned
12 facing the right or the left.
12 The strings will not be touched
12 If the guitar is carefully placed
12 holding the back of the neck.
13 Then position the guitar body in the
13 stand...
14 ...then the back of the guitar neck
14 in the corresponding holder.
TECHNICAL DATAS
Materials
feet - PA with fiber
cushions - TP-elastomer
frames, bolting assemblies - steel, alu
Capacity max. 5 electric guitars and 10 picks
Dimensions B x T x H 688 x 335 x 700 mm
Packed size B x T x H 688 x 173 x 670 mm
Carton B x T x H 700 x 175 x 670 mm
Weight net 4.7 kg; gross 5.8 kg
Your guitars are in very good hands with the »Guardian«!
7 The upholstered elements provide protection for your guitar
8 The protective racks prevent knocking
9 Recesses in the support rack position the guitars and prevent turning
NOTE:
We use high quality materials – to protect the guitar. The "softness" of some paints, especially those with a cellulose nitrate base
means pressure marks may appear on the instrument due to the force of gravity, but these are minimal and compared to normal wear
and tear insignificant.
PICK HOLDERS:
There are 5 x 2 integrated pick holders
behind the neck rack. We recommend
removing the plectra before folding and
transporting the stand.
cavity for
e-guitar (5x)
contact
elements (5x)
protective bars (6x)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Konig & Meyer Guardian 5 and is the answer not in the manual?

Konig & Meyer Guardian 5 Specifications

General IconGeneral
MaterialPlastic
Product typeGuitar stand
Product colorBlack, Translucent
Weight and Dimensions IconWeight and Dimensions
Depth335 mm
Width996 mm
Height700 mm
Weight4600 g

Related product manuals