17525 Five electric guitar stand »Guardian 5«
- flexible and versatile: for the stage, studio, shop and home
- exceptional instrument protection: quality materials (flexible, translucent contact elements)
intelligent stand design (protective holders, recesses, support arms)
- 10 integrated plectrum holders
- light, space-saving transport – simple to set up and collapse
- simply to use; no tools required for assembly
SAFETY INSTRUCTIONS
- Make sure the floor is suitable, sustainable and level
- Base frame and neck frame must be clicked into place in working order
- The possibility to fold the product bears the danger of squeezing. For this reason, use caution and careful handling when setting up,
- using and taking down.
- Only for guitars, not for other things like clothes etc.
- Please be careful of the soft parts while transporting
- Do not move or transport with guitars
SET UP
All the stand construction components are
Preassembled and only need to be positioned
as follows:
1 Fold out completely the folded stand at
1 the guitar neck and body racks ...
2 ...until they are at a 90° angle
2 and have clicked into place.
2 The vertical rack cannot
2 “inadvertently” tilt forwards.
3 Now stand the »Guardian« on its base.
REMOVAL
PLEASE NOTE!
1. PUSH 4
2. CLOSE 5
4 To release the lock, press both vertical
4 side sections down SIMULTANEOUSLY (push) ...
5 ...the rack section will fold forwards (close)...
6 ...until the end position has been reached - where it
6 will remain.
The folded stand is space-saving and
recommended for transport.
Thank you for choosing this product. This instruction manual informs you about the important steps to set up an handle the product. We
recommend to keep the manual in a separate place for a possible later use.
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
17525-000-00 Rev.03 03-80-266-00 1/13
To Next Page
Loading...
Need help?
General
Weight and Dimensions
