5. LiveView
During the first use of the IP network camera, you
need to modify the IE security setting parameters (for
details refer to the setting procedures below).
Otherwise, the following prompt may appear in IE,
causing failure in the image detection. After
successful change of this setting, you do not need to
repeat it anymore in the future.
Procedures for Modifying IE Security Setting
Step 1: In an IE window, select the Tools Internet
Options menu.
Step 2: Click the Security tab and then click
<Custom Level>. In the pop-up window, select the
following options:
- Download unsigned ActiveX controls: click Prompt.
- Initialize and script ActiveX controls not marked as
safe: click Enable.
- Run ActiveX controls and plug-ins: click Enable
- Script ActiveX controls marked safe for scripting:
click Enable
Step 3: Click <OK>, and an alert box appears. Click
<Yes> to return to the previous window, and then
click <OK> to finish setting.
Step 4: Click the Prompt column, select Install
ActiveX Controls from the pop-up menu, and you
can browse for the first time after automatic refresh.
To Next Page
Loading...
