6. Capture Images
This function can capture PC images and store them
in the PC.
Operating procedures:
Step 1: Enter the LiveView list.
Step 2: Select an appropriate image, press and hold
the <Ctrl> key on the keyboard.
Step 3: Move the cursor to the monitoring image
picture, and click (or press and hold the <Capture
Image> button on the top), and “Shot taken” will flash
once.
Step 4: Release the <Ctrl> key to successfully take a
single static shot. The picture taken will be stored in
the directory C:\tmp\webcam.
Step 5: Click to select the <CaptureView> list on the
left to view the shot taken.
To Next Page
Loading...
