To Next PageTo Next Page
Need help?Do you have a question about the Konig CMP-UPS650VAL and is the answer not in the manual?
General| Model | CMP-UPS650VAL |
|---|---|
| Type | Line-interactive |
| Capacity | 650 VA / 360 W |
| Output Power | 360 W |
| Output Power (VA/W) | 650 VA / 360 W |
| Output Voltage | 230 V |
| Output Voltage Tolerance | ±10% |
| Output Frequency | 50/60 Hz |
| Frequency | 50/60 Hz |
| Battery Runtime | 5 - 15 minutes (depending on load) |
| Output Waveform | Simulated sine wave |
| Communication Interface | USB |
| Operating Temperature | 0-40°C |
| Storage Temperature | -15-45°C |
| Input Voltage Tolerance | 162-290 V |
| Transfer Time | 2-6 ms |
| Battery Type | Sealed lead-acid |
| Battery Recharge Time | 6-8 hours to 90% |
| Humidity | 0-90% (non-condensing) |
Identifies front/rear panel components and explains status indicator lights.
How to connect the UPS to power, charge the battery, and connect loads.
Steps for connecting the USB cable and installing monitoring software for UPS management.
Instructions on how to turn the UPS unit on and off.
Safety warnings, cleaning advice, warranty terms, and product disposal information.
