Need help?Do you have a question about the Kontron KTQ77/Flex and is the answer not in the manual?
Step-by-step guide for board installation.
Safety requirements for chassis interface connectors.
Summary of key features and specifications of the motherboard.
Block diagram illustrating main components and architecture.
Lists supported Intel CPUs and their specifications.
Details on supported DDR3 memory modules and configurations.
Information about integrated graphics capabilities and features.
Power requirements and consumption measurements under various loads.
Visual layout of connectors on the front side of the board.
Visual layout of connectors on the backside of the board.
Details on VGA, DisplayPort, and LVDS output connectors.
Pinout and signal description for DisplayPort connectors.
Specifications and pinout for RJ45 Ethernet ports.
Information on USB 2.0 and USB 3.0 port configurations.
Details on the 7.1+2 channel audio jack connector.
Pinout and signal definition for the serial port COM1.
Pinout and specifications for ATX/BTX power connectors.
Pinout and functionality for CPU and system fan connectors.
Pinout for PS/2 keyboard and mouse connection.
Details on internal LVDS flat panel connector.
Pinout and specifications for SATA disk interfaces.
Information on internal USB pinrow connectors.
Pinouts for internal serial COM ports.
Details on internal audio connectors like CDROM input.
Pinout for the internal audio header connector.
Pinout for front panel connections (power, LEDs, etc.).
Pinout for various feature and GPIO connections.
Jumper for resetting BIOS to default settings.
Jumper for BIOS recovery via SPI flash.
Connector for SPI BIOS connection.
Overview of PCIe slots including x16, x4, and miniPCIe.
Pinout for the 16-lane PCI Express x16 slot.
Connector for mSATA SSD cards.
Connector for miniPCI-Express cards.
Pinout for the 4-lane PCI Express x4 connector.
Details on the two standard PCI slots.
Hexadecimal addresses and descriptions of memory regions.
List of PCI devices with vendor and device IDs.
Table showing IRQ assignments for various system components.
Hexadecimal addresses and descriptions of I/O port mappings.
Overview of BIOS main settings and system information.
Access to various advanced BIOS configuration submenus.
BIOS settings related to the motherboard chipset.
BIOS settings for system boot order and options.
BIOS options for system security and password protection.
Options to save or discard BIOS changes and exit.
General| Processor Socket | LGA 1155 |
|---|---|
| Chipset | Intel Q77 Express |
| Memory Type | DDR3 |
| Max Memory | 32 GB |
| Graphics Output | VGA, DVI-D, DisplayPort |
| Mini-PCIe | 1 |
| mSATA | 1 |
| Operating Temperature | 0°C to 60°C |
| Power Supply | ATX |
| Processor Support | Intel Core i7/i5/i3, Pentium, Celeron (3rd/2nd generation) |
| Ethernet | 2 x Gigabit Ethernet |
| Expansion Slots | PCIe x16 |
| Network | Intel 82579LM Gigabit Ethernet |
| Form Factor | Flex-ATX |
| Memory Slots | 4 x DIMM |
| Storage Interface | SATA II, SATA III |
| USB Ports | 4x USB 3.0 (2 rear, 2 via header), 8x USB 2.0 (4 rear, 4 via header) |
To Next Page
