Kontron KTQ77/Flex - Advanced - Trusted Computing

KTQ77/Flex Users Guide
KTD-N0848-B Page 75
10.2.3 Advanced - Trusted Computing
Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc.
Advanced
TPM Configuration
TPM Support
TPM State
Pending TPM operation
Current TPM Status Information
TPM Enabled Status:
TPM Active Status:
TPM Owner Status:
[Enable]
[Disabled]
[None]
[Disabled]
[Deactivated]
[UnOwned]
Enables or Disables BIOS
support for security device.
O.S.
will not show Security Device.
TCG EFI protocol and INT1A
interface will not be available.
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.15.1236. Copyright © 2012 American Megatrends, Inc
Function Selection Description
TPM Support
Disabled
Enabled
Enables or Disables BIOS support for
security device. O.S. will not show Security
Device. TCG EFI protocol and INT1A
interface will not be available.
TPM State
Disabled
Enabled
Turn TPM Enable/Disable. NOTE: Your
Computer will reboot during restart in order
to change State of TPM.
Pending operation
None
Enable Take Ownership
Disable Take Ownership
TPM Clear
Schedule an Operation for the Security
Device. NOTE: Your Computer will reboot
during restart in order to change State of the
Device.
BIOS - Advanced