Do you have a question about the Koolaire ES90A Series and is the answer not in the manual?
Explains the different types of safety notices used: Warning, Caution, Procedural, Important, and Note.
Lists the ice machine models covered and optional accessories like water filter systems.
Details where to find the model and serial number decals on the ice machine for identification.
Covers warranty registration, coverage details, exclusions, authorized service, and service calls.
Step-by-step instructions for cleaning and sanitizing the ice machine interior components and parts.
Guidelines for inspecting fittings, lines, and performing exterior cleaning of the ice machine.
Instructions on how to clean the ice machine condenser for optimal performance and longevity.
Procedures for safely removing the ice machine from service and preparing it for winter storage.
Provides diagrams showing the physical dimensions for various ice machine models.
Specifies criteria for selecting an appropriate installation location and required clearances.
Step-by-step guide on how to properly level the ice machine using its adjustable legs.
Details voltage, fuse/breaker requirements, and circuit ampacity for electrical connections.
Guidelines for connecting water supply and drain lines according to code and best practices.
A checklist of essential items to verify before starting the ice machine installation process.
Illustrates and identifies key internal and external components of the ice machine.
Explains the step-by-step operational sequence for ice making, harvest, and automatic shut-off.
A chart detailing the energized state of various parts during different operational sequences.
Procedures for performing general operational checks, including water float valve verification.
Guidance on checking water level and adjusting ice bridge thickness for optimal ice production.
A guide to diagnosing and resolving common ice machine problems before contacting service personnel.
Describes built-in safety limits that may stop the ice machine and how to restart it.