Koolaire KDT0300A - Page 83

Part Number STH063 9/17 83
Operational Analysis 1 2  4
Freeze Cycle
Discharge Pressure
________ ______ ______ 1 minute Middle End
If discharge pressure is High or Low, refer to freeze cycle high or low discharge pressure problem checklist
to eliminate problems and/or components not listed on this table before proceeding.
Freeze Cycle Suction Pressure
________ ______ ______ 1 minute Middle End
If suction pressure is High or Low refer to freeze cycle high or low suction pressure problem checklist to
eliminate problems and/or components not listed on this table before proceeding.
Suction pressure is
High
Suction pressure is
Low
Suction pressure is
High
Suction pressure is
High