Need help?Do you have a question about the Koolaire KYT1700A and is the answer not in the manual?
Details the necessary space around the ice machine for proper airflow and access.
Outlines voltage, fuse, and wiring specifications for safe installation.
Covers guidelines for connecting water supply and drain lines.
Provides information on remote condenser setup and line sets.
Guides on using the control board test mode and diagnosing start-up issues.
Addresses problems with harvest cycle initiation and ice production.
Explains how to identify and interpret safety limit codes indicated by control board lights.
Provides procedures for analyzing discharge and suction pressures for diagnosis.
Covers diagnosing issues with harvest valves, temperatures, and refrigeration components.
Guides on checking installation levelness and water system integrity.
Provides procedures for testing the ice thickness and harvest float switches.
Guides on checking compressor resistance, windings, and amp draw.
Details how to test the fan cycle control for proper operation.
Explains how to test the HPCO control for proper pressure cut-out functionality.
Explains how to verify correct refrigerant amount for optimal operation.
Details the function and troubleshooting of the water regulating valve.
Provides step-by-step procedures for recovering and recharging refrigerant safely.
Describes requirements for restoring contaminated systems to reliable service.
Details the steps for cleaning systems with mild contamination.
Outlines the procedure for cleaning systems with severe contamination.
Procedure to replace components without venting the refrigerant charge.
Contains electrical wiring diagrams for various ice machine models.
To Next Page
General