EasyManua.ls Logo

Koolaire KYT1700A - Water Service;Drains

Default Icon
152 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Part Number STH063 9/17 19
Water Service/Drains
WATER SUPPLY
Local water conditions may require treatment of the water
to inhibit scale formation, filter sediment, and remove
chlorine odor and taste.
Important
If you are installing a water filter system, refer to the
Installation Instructions supplied with the filter system
for ice making water inlet connections.
n
Warning
For ice making, connect to a potable water supply only.
WATER INLET LINES
Follow these guidelines to install water inlet lines:
Do not connect the ice machine to a hot water supply.
Be sure all hot water restrictors installed for other
equipment are working. (Check valves on sink faucets,
dishwashers, etc.)
If water pressure exceeds the maximum recommended
pressure, 80 psig (5.5 bar) obtain a water pressure
regulator from your Koolaire distributor.
Install a water shut-off valve for ice making potable
water.
Insulate water inlet lines to prevent condensation.

Table of Contents

Related product manuals