Need help?Do you have a question about the Koolaire KY0350A and is the answer not in the manual?
Covers lifting, electrical hazards, and general usage safety.
Lists the different ice machine models covered by the manual.
Explains the requirement for an ice deflector.
Details how to align and place the ice machine on a bin.
Criteria for selecting an appropriate installation location for the ice machine.
Specifies necessary clearances around the ice machine for airflow and servicing.
Provides data on heat rejected by the ice machine for AC sizing.
Instructions for preparing the ice storage bin before machine installation.
Describes the installation of the air baffle for self-contained air-cooled models.
Details electrical connection requirements and safety.
Discusses the use and recommendation regarding GFCI protection.
Lists specifications for power cords based on breaker size.
Wiring instructions specific to the United Kingdom.
Chart detailing breaker and amperage requirements for different models.
Guidelines for connecting water supply and drain lines.
Specific instructions for installing water inlet lines.
Recommendations for proper installation of drain lines.
Table detailing water/drain line sizes and connections.
Information on water pressure limits for water-cooled condensers.
Notes on installing water-cooled models with cooling towers.
Overview of installing remote condenser and line sets.
General mounting and installation guidelines for remote condensers.
Wiring instructions for the remote condenser fan motor.
Best practices for routing refrigerant line sets.
Method for calculating maximum allowable line set distances.
Instructions on routing, connecting, and purging the refrigerant line set.
Procedures for pressure testing and evacuating the system.
How to open the line set valves after installation.
A list of items to check before starting the ice machine.
Specific checks required for remote ice machine installations.
Final preparation steps before initial operation.
Describes the step-by-step process of ice production.
Explains built-in safety mechanisms that stop the machine.
Details the non-adjustable timers on the control board.
Procedures for checking the ice machine's operation.
How to inspect and adjust ice cube thickness.
General overview of cleaning and sanitizing the ice machine.
Detailed steps for the cleaning and sanitizing process.
Procedure for cleaning between major sanitization cycles.
Instructions for cleaning the exterior surfaces of the ice machine.
Instructions for removing specific parts needed for cleaning.
Specific steps for the sanitizing process.
Detailed steps for the preventative maintenance cleaning.
Instructions for door removal, filter, and condenser cleaning.
Procedures for preparing the ice machine for removal from service or winterization.
Specific winterization steps for water-cooled models.
A checklist to diagnose and resolve common ice machine problems.
Guidance on diagnosing issues related to the safety limit feature.
Diagnosing and fixing problems with ice quality and low ice production.
Procedure for restarting the ice machine after a safety limit stop.
Details the warranty terms for commercial ice machines.
Outlines the limited warranty for residential ice machines.
Details what is covered and not covered by the warranty.
Specific warranty terms for ice storage bins.
General| Model | KY0350A |
|---|---|
| Refrigerant | R404A |
| Type | Ice Maker |
| Ice Type | Half Cube; Full Cube |
| Power Supply | 115V/60Hz/1Ph |
| Weight | 160 lb |
| Condenser Type | Air-Cooled |
| Ice Storage Capacity | Not included (Modular unit) |
To Next Page