EasyManua.ls Logo

Kooper 5902518 - Part Names and Functions; Installation

Kooper 5902518
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...

Room temperature increases during operation.
This dehumidifier has no cooling function. During operation, the unit will produce heat causing the room
temperature to rise (1 to 4 °C higher, depending on the size of the room and conditions of use). This temperature
increase can be very noticeable in small spaces.
Dehumidification capacity
The following illustration shows the daily dehumidification capacity of the dehumidifier. This capacity is based on
a temperature up to 30°C room temperature set by the dehumidifier, 80% relative humidity and data when the air
output is at its maximum. At dierent temperatures and relative humidity, the dehumidification capacity may vary.
At the same ambient temperature, the dehumidification capacity is higher at high relative humidity and lower at
low relative humidity. At the same relative humidity, the dehumidification capacity is higher at higher temperatures
and lower at lower temperatures. If the dehumidifier is placed in small spaces, its dehumidification capacity is
significantly reduced.
.
. PART NAMES AND FUNCTIONS
Front Back
Installation
To ensure safe and eicient operation of the dehumidifier, make sure to observe the distances shown in the
adjacent figure. Before using the dehumidifier, place it on a flat, stable and non-slip surface. Only then connect to
the power supply and start up
NOTES: The minimum area for using the dehumidifier is 4m2. If other household appliances are used in the same
room as the dehumidifier, the dehumidifier may be interfered with. In this case, keep the dehumidifier away from
other appliances at a distance of at least 1 meter.

Other manuals for Kooper 5902518